高性能混凝土耐火性能及对策探讨

高性能混凝土与传统混凝土相比,结构密实,脆性更大,渗透性低,尤其是在火灾高温状态下发生爆裂现象因而造成其抗火性差。为此,提出在高性能混凝土中混掺聚丙烯纤维和钢纤维、外加减水剂及骨料两种技术措施,以提高高性能混凝土的耐火性能。     

基于方位角变化率的快速高精度无源定位方法

在分析现有单站无源定位方法优缺点的基础上,根据运动平台对固定目标无源定位技术的特点,提出了一种通过方位角变化率信息对观测站与目标间距离进行解算的快速高精度无源定位方法。并通过仿真,验证了该方法是一种高精度、快速的定位方法,具有较强的通用性。其主要应用于机载无源探测设备对地面固定雷达站或其他辐射源定位,从而为引导导弹对其攻击提供必要的数据。     

面向任务的导弹测试性需求分析与指标确定

针对当前缺乏科学合理的理论和方法确定导弹系统级测试性指标的现状,提出一种面向任务需求的测试性指标确定方法.将导弹任务剖面划分为贮存、出库、部署和发射四个阶段,并提出各个阶段相应的测试需求;分别建立基于贮存可用度、战斗准备任务成功率、部署战备完好率和发射任务成功率为性能要求的测试性需求子模型,给出各个性能指标与测试性参数...     

南水北调中线工程安阳段渠坡换填土的强度特性研究

为了分析南水北调中线工程安阳段渠坡的稳定性,对该渠坡换填土在不同含水率下进行了不固结不排水三轴剪切试验.研究结果表明:剪切速率对基质吸力的影响较大,而对强度的影响较小;通过比较确定了合适的剪切速率;含水率相同的试样在不同围压下的强度值在pf -qf坐标上呈良好的线性关系;得到了试样在不同含水率下的总强度指标,建立了总内...     

导弹贮存寿命预估的组合模型

在分析比较了几种寿命预估方法优缺点的基础上,针对单一预估方法在解决实际问题中所暴露的局限性,优选了GM-BPNN组合预估模型。该组合模型既利用了灰色预估理论具有所需要的样本数据少、原理简单、运算方便、短期预估精度高、可检验等优点,也发挥了神经网络并行计算、容错能力强、自适应能力强等优点。最后利用该组合模型对弹上某设备寿命进行了预估,取得了较好的预测效果。     

概率分布模型的飞机战备完好率评估与预测

飞机战备完好率是军用飞机战斗力的重要体现.在分析目前部队常用的飞机战备完好率算法缺陷的基础上,建立了基于概率分布的飞机战备完好率计算模型,该模型体现了飞机任务可靠性、维修性与战备完好性之间的关系.以某型飞机为例,通过分析飞机任务可靠度,利用飞机可靠性、维修性、保障性及作战训练任务的历史统计数据,依据概率分布模型对飞机的...     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

A novel formulation of material nonlinear analysis in structural mechanics

This article demonstrates a novel approach for material nonlinear analysis. This analysis procedure eliminates tedious and lengthy step by step incremental and then iterative procedure adopted classically and gives direct results in the linear as well as in nonlinear range of the material behavior. Use of elastic moduli is eliminated. Instead, stress and strain functions are used as the material input in the analysis procedure. These stress and strain functions are directly derived from the stress-strain behavior of the material by the method of curve fitting. This way, the whole stress-strain diagram is utilized in the analysis which naturally exposes the response of structure when loading is in nonlinear range of the material behavior. It is found that it is an excellent computational procedure adopted so far for material nonlinear analysis which gives very accurate results, easy to adopt and simple in calculations. The method eliminates all types of linearity assumptions in basic derivations of equations and hence, eliminates all types of possibility of errors in the analysis procedure as well. As it is required to know stress distribution in the structural body by proper modelling and structural idealization, the proposed analysis approach can be regarded as stress-based analysis procedure. Basic problems such as uniaxial problem, beam bending, and torsion problems are solved. It is found that approach is very suitable for solving the problems of fracture mechanics. Energy release rate for plate with center crack and double cantilever beam specimen is also evaluated. The approach solves the fracture problem with relative ease in strength of material style calculations. For all problems, results are compared with the classical displacement-based liner theory.     

N、P源对微生物法处理石油烃效果的影响

在微生物法处理石油烃的过程中,微生物对N、P源的供给非常敏感,不同的微生物对不同的N、P源的生物利用度是不相同的,N、P源的选择对降解效果有较大影响,所以有必要对最佳的N、P源进行筛选。对N、P源的逸择和加入量对降解效果的影响进行了研究,确定了最佳的N、P源分别为(NH4)2SO4、KH2PO4。在(NH4)2SO4、KH2PO4的质量浓度分别为100mg／L和60mg／L时,废水中石油烃的去除率最高。     

某压力容器壳体水压爆裂原因分析

针对某压力容器壳体生产过程中出现的水压试验异常爆裂问题,通过材料成分、热处理组织、力学性能、宏观和微观断口分析,确定了裂源位置、裂纹缺陷性质、产生原因及断裂机理;通过断裂力学分析,确定了水压爆裂的原因。提出了淬火工艺改进建议和防范措施。